Guide 3 of 10 in your setup planAmazon FireStick with TiviMate See the planHide the plan
- 1Where to Find Your IPTV Login Details
- 2Does My Fire TV Stick Support IPTV Apps? Check Before You Buy
- 3How to Plug In a Fire TV Stick for the First Time
- 4How to Connect or Change Wi-Fi on a Firestick
- 5How to Turn On Developer Options on a Fire TV Stick
- 6Full Steps to Install Downloader App on Fire TV Stick
- 7How to Install TiviMate on FireStick
- 8How to Add Xtream Codes to TiviMate ?
- 9How to Change Channels and Use the Remote in TiviMate
- 10How to Add Favourite Channels and Hide Groups in TiviMate
Using something else? Choose your device and app
Before you startPlease finish this guide first: Does My Fire TV Stick Support IPTV Apps? Check Before You Buy. If you already did it, carry on below.
See all 7 steps
1Unpack the box2Find an HDMI port on your TV3Plug the stick into the TV4Connect the power5Turn on the TV and choose the input6Put the batteries in the remote7Follow the instructions on screenThis takes about ten minutes, and you cannot break anything. Have your Wi-Fi name and password nearby before you start.
1
Unpack the box
Inside you will find the stick, the remote, a power cable, a power plug and two small batteries. You may also find a short cable called an HDMI extender. Keep it, as it often helps.
2
Find an HDMI port on your TV
Look at the back or the side of your TV. An HDMI port is a thin, flat slot, wider at the top than at the bottom. It usually has the word HDMI and a number beside it. Remember the number.
3
Plug the stick into the TV
Push the stick gently into the HDMI port. It fits only one way, so do not force it. If space is tight, plug the short extender cable into the TV first, then plug the stick into the extender.
4
Connect the power
Plug the small end of the power cable into the side of the stick, then plug the power plug into a wall outlet. Use the wall outlet, not the TV’s USB port, because the TV’s port is often too weak.
5
Turn on the TV and choose the input
Turn on your TV with its own remote. Press the button called Input or Source, then choose the HDMI number you remembered. After a moment, the Fire TV screen appears. See our guide on the TV’s HDMI input if it does not.
6
Put the batteries in the remote
Slide the back cover off the Fire TV remote and put in the two batteries. Match the plus and minus signs. The remote should connect by itself. If asked, hold the Home button for about ten seconds.
7
Follow the instructions on screen
The stick asks you to choose your language, then your Wi-Fi network. Type your Wi-Fi password, then sign in to an Amazon account. You can create a free account on your phone if you do not have one. You are done.
What’s next
When this guide is done, go to guide 4 of 10.
Next: How to Connect or Change Wi-Fi on a Firestick →If something goes wrong
Still need help?
Message the IPTV Canada support team every day from 6 AM to 11 PM Eastern, in English or French. A photo of your screen helps us a lot.
WhatsApp us Email us